4-Post Car Lift 9,000 lbs. Capacity

Product Details Hold project cars, classics, daily drivers and more with this Dannmar D4-9 4-post car lift. You can fasten it to the floor or have it freestanding. The stainless steel lifting cables handle over 14,000 lbs. each. For safety, this car lift features 3/4 in. thick spring-loaded steel safety locks and a secondary slack-cable lock system that provides instant back-up if the cable fails. D4-9 is designed to be fastened to the floor or freestanding Comes standard with a mobile caster kit, drip trays, mobile jack tray, aluminum approach ramps, hardened steel tire stops and hard rubber wheel chocks Boxed-steel columns are made from structural 4.75 in. x 4.75 in. welded steel tubing Columns feature 12 in. x 12 in. baseplates 5/8 in. thick Reliable and safe manual dead-bolt locks are machined directly into the boxed-steel columns 3/4 in. thick steel safety locks are spring loaded for automatic and solid engagement 13 positive locking positions are spaced every 4 in. Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment Welded-steel runways feature utility rail for jack tray and drip trays and other accessories Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing Low-profile runways are only 5 in. H to accommodate low ride-height vehicles Hardened steel safety lock linkages use 3/8 in. molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance 5/8 in. thick top caps Pull out tire stops on both ends of the lift that allows drive through capability Stainless steel lifting cables are rated to handle over 14,000 lbs. each Specifications Dimensions: H 89 in, W 165.5 in, D 114.5 in Dimensions Product Depth (in.) 114.5 in Product Height (in.) 89 in Product Width (in.) 165.5 in Details Car Lift Application Commercial, Features No Additional Features General Part Type 4 Post Car Lift Included Removeable Approach Ramp Material Steel Maximum Lift Height (in.) 75 in Minimum Lift Height (in.) 5 Number of Vertical Supports 4 Product Weight (lb.) 1746 lb Suggested Use ATV, Garage, Home, Storage Weight Capacity (lb.) 9000 lb Warranty / Certifications Manufacturer Warranty 3 years structural, 1 year cylinders and power unit; operating components; electrical components (excluding power unit)